Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Maekawa, Fujio; Takei, Hayanori
Purazuma, Kaku Yugo Gakkai-Shi, 98(5), p.206 - 210, 2022/05
In developing an accelerator-driven nuclear transmutation system (ADS), it is necessary to solve technical issues related to proton beams, such as the development of materials that can withstand high-intensity proton beams and the characterization of subcritical cores driven by proton beams. Therefore, at the high-intensity proton accelerator facility J-PARC, a transmutation experimental facility that actually conducts various tests using a high-intensity proton beam is being planned. This paper introduces the outline and future direction of the transmutation experimental facility.
Eguchi, Yuta; Sugawara, Takanori; Nishihara, Kenji; Tazawa, Yujiro; Tsujimoto, Kazufumi
Proceedings of 26th International Conference on Nuclear Engineering (ICONE-26) (Internet), 8 Pages, 2018/07
In order to investigate the basic neutronics characteristics of the accelerator-driven subcritical system (ADS), JAEA has a plan to construct a new critical assembly in the J-PARC project, Transmutation Physics Experimental Facility (TEF-P). This study aims to evaluate the natural cooling characteristics of TEF-P core which has large decay heat by minor actinide (MA) fuel, and to achieve a design that does not damage the core and the fuels during the failure of the core cooling system. In the evaluation of the TEF-P core temperature, empty rectangular lattice tube outer of the core has a significant effect on the heat transfer characteristics. The experiments by using the mockup device were performed to validate the heat transfer coefficient and experimental results were obtained. By using the obtained experimental results, the three-dimensional heat transfer analysis of TEF-P core were performed, and the maximum core temperature was obtained, 294
C. This result shows TEF-P core temperature would be less than 327C that the design criterion of temperature.
Maekawa, Fujio; Transmutation Expeimental Facility Design Team
Plasma and Fusion Research (Internet), 13(Sp.1), p.2505045_1 - 2505045_4, 2018/05
The partitioning and transmutation (P-T) technology has promising potential for volume reduction and mitigation of degree of harmfulness of high-level radioactive waste. JAEA is promoting development of the P-T technology by using an accelerator driven system (ADS). To facilitate the development, we have a plan to construct the Transmutation Experimental Facility (TEF) as one of experimental facilities of J-PARC (Japan Proton Accelerator Research Complex). TEF consists of two facilities: the ADS Target Test Facility (TEF-T) and the Transmutation Physics Experimental Facility (TEF-P). Recent progress in design and R&D efforts toward construction of J-PARC TEF will be presented.
Partitioning and Transmutation Technology Division, Nuclear Science and Engineering Center
JAEA-Technology 2017-033, 383 Pages, 2018/02
JAEA-Technology-2017-033.pdf:28.16MB
JAEA is pursuing research and development (R&D) on volume reduction and mitigation of degree of harmfulness of high-level radioactive waste. Construction of Transmutation Experimental Facility (TEF) is under planning as one of the second phase facilities in the Japan Proton Accelerator Complex (J-PARC) program to promote R&D on the transmutation technology with using accelerator driven systems (ADS). The TEF consists of two facilities: ADS Target Test Facility (TEF-T) and Transmutation Physics Experimental Facility (TEF-P). Development of spallation target technology and study on target materials are to be conducted in TEF-T with impinging a high intensity proton beam on a liquid lead-bismuth eutectic target. Whereas in TEF-P, by introducing a proton beam to minor actinide loaded cores, reactor physical properties of the cores are to be studied, and operation experiences of ADS are to be acquired. This report summarizes results of safety design for establishment permit of one of two TEF facilities, TEF-P.
Sugawara, Takanori; Tsujimoto, Kazufumi
JAEA-Research 2017-011, 35 Pages, 2017/10
JAEA-Research-2017-011.pdf:4.88MB
The construction of Transmutation Physics Experimental Facility (TEF-P) is planned in the J-PARC project. TEF-P is a critical assembly and it will treat minor actinide (MA) fuel in the experiment. The temperature when the air cooling for the TEF-P core would stop was estimated but there were no data to evaluate the soundness of the MA fuel pin. To set a tentative limit temperature for the TEF-P core, cladding tube burst experiment was performed. As the result, the cladding tube burst occurred at 660C as the severest case. Through these results and the estimation of creep rupture time, the tentative limit temperature for the TEF-P core was set to 600C.
Tazawa, Yujiro; Nishihara, Kenji; Sugawara, Takanori; Tsujimoto, Kazufumi; Sasa, Toshinobu; Eguchi, Yuta; Kikuchi, Masashi*; Inoue, Akira*
JAEA-Technology 2016-029, 52 Pages, 2016/12
JAEA-Technology-2016-029.pdf:5.34MB
Transmutation Physics Experimental Facility (TEF-P) planned in the J-PARC project uses minor actinide (MA) fuels in the experiments. These MA fuels are highly-radioactive, so the fuel handling equipment in TEF-P is necessary to be designed as remote-handling system. This report summarizes fabrication and test results of the testing equipment for fuel loading that is one of components of the testing equipment for remote-handling of MA fuels. The testing equipment which had a remote-handling system for fuel loading was fabricated. And the test in combination with the mock-up core was performed. Through the test, it was confirmed to load/take the dummy fuel pin to/from the mock-up core without failure. It was shown that the concept design of the fuel loading equipment of TEF-P was reasonable.
Eguchi, Yuta; Sugawara, Takanori; Nishihara, Kenji; Tazawa, Yujiro; Inoue, Akira; Tsujimoto, Kazufumi
JAEA-Technology 2015-052, 34 Pages, 2016/03
JAEA-Technology-2015-052.pdf:5.02MB
Transmutation Physics Experimental Facility (TEF-P) planned in the J-PARC project uses minor actinide (MA) fuel which has large decay heat. So it is necessary to consider the increase of the core temperature when the core cooling system is stopped. This change of the core temperature was evaluated by thermal conduction analysis. It was found that the impact of thermal insulation in the empty rectangular lattice matrix area was large. So it is necessary to verify reliability and accuracy of heat transfer effect used in this area. Testing equipment was fabricated to verify the accuracy of calculation model for the empty lattice matrix which was the free convection model of sealed fluid. By using this equipment, thermal distribution and one dimensional heat flow through the lattice were measured. It was observed that the actual equivalent thermal conductivity in the lattice was larger than the free convection model. It was also confirmed that the insertion of the aluminum block into the empty lattice could achieve the higher equivalent thermal conductivity. These results could be the useful data for the thermal conduction analysis.
Nishihara, Kenji; Tazawa, Yujiro; Inoue, Akira; Sugawara, Takanori; Tsujimoto, Kazufumi; Sasa, Toshinobu; Obayashi, Hironari; Yamaguchi, Kazushi; Kikuchi, Masashi*
JAEA-Technology 2015-051, 47 Pages, 2016/03
JAEA-Technology-2015-051.pdf:3.6MB
This report summarizes fabrication and test results of a testing equipment for fuel cooling that is a component of the testing equipment for remote-handling of highly-radioactive MA fuels in the transmutation physics experimental facility (TEF-P) planned in the J-PARC. Evaluation formula of pressure drop and temperature increase used in the design of TEF-P was validated by the test, and, feasibility of cooling concept was confirmed.
beam extraction technique using YAG laserMeigo, Shinichiro; Hasegawa, Kazuo; Ikeda, Yujiro; Oigawa, Hiroyuki; Aoki, Nobutada*; Nakagawa, S.*
JAERI-Tech 2002-095, 40 Pages, 2002/12
JAERI-Tech-2002-095.pdf:2.67MB
no abstracts in English
Iwamoto, Hiroki; Nishihara, Kenji; Sugawara, Takanori; Tsujimoto, Kazufumi; Sasa, Toshinobu; Maekawa, Fujio
no journal, ,
Maekawa, Fujio
no journal, ,
no abstracts in English
Eguchi, Yuta; Sugawara, Takanori; Nishihara, Kenji; Tazawa, Yujiro; Tsujimoto, Kazufumi
no journal, ,
Transmutation Physics Experimental Facility (TEF-P) planned in the J-PARC project uses minor actinide (MA) fuel which has large decay heat. So it is necessary to consider the increase of the core temperature when the core cooling system is stopped. This change of the core temperature was evaluated by thermal conduction analysis. It was found that the impact of thermal insulation in the empty rectangular lattice matrix area was large. Testing equipment was fabricated to verify the accuracy of calculation model for the empty lattice matrix which was the free convection model of sealed fluid. By using this equipment, thermal distribution and one dimensional heat flow through the lattice were measured. It was observed that the actual equivalent thermal conductivity in the lattice was larger than the free convection model. It was also confirmed that the insertion of the aluminum block into the empty lattice could achieve the higher equivalent thermal conductivity. These results could be the useful data for the thermal conduction analysis.
